Avenue Support
Downloads
- Software and Firmware Downloads
Software and firmware downloads require a product serial number. - Manuals
Operational manuals for Avenue frames and modules. - SNMP Resources
Documentation for controlling and monitoring Avenue systems via SNMP.
Test Pattern Generator Software 1.0
12 Dec 2011- For use with Avenue 7400 and BrightEye 57 test signal generators.
Support Bulletins
Avenue 7400 Module Firmware Release History - 30 November 2009
Avenue Module Firmware Upgrade Requirements - 13 December 2007
You will need a 5030 or 5035 control module in the frame. Your PC can be connected directly to the Avenue frame your are working with, or to one of the other Avenue frames on the AveNet network. From this site, download the module software you want. Run Avenue PC and use it to upload the new software into the module.
Configuring an Avenue Module without the Control Module - 13 December 2007
Switch the local/remote switch on the front edge of the module to local. Now the module use’s the settings that are set through the dip switches on front edge of the module.
Touch Screen Calibration - 13 December 2007
After installing a new 5030 control module into a 3RU Frame with a touch screen it is necessary to recalibrate the touch screen. Go to the Configuration menu, then to the Touch Screen Calibration menu, press on the targets, then press Done.