7900 HD Up/Down/Cross Converter

• Upconverter
• Downconverter
• Cross Converter
• Aspect Ratio Converter
• Smart auto-config — set output, then feed any input
• Proc Amp and Frame Sync
• Audio Mux/Demux optional
• All processing performed on 4:4:4 progressive signals
• Accepts asynchronous signals
• Automatically adjusts between SD/HD color space and gamma
• 16 bit processing
• Edge and Motion Adaptive Noise Reduction
• Picture Detail Enhancement
• Anti-Alias Filter
• Passes closed captioning
• Auto detection of input standard and frame rate
• 3:2 pulldown
• Built-in test pattern and tone
• Local and remote control
• Occupies one slot in frame, even with audio option

Do It All With One Module

The 7900 is a flexible, con!gurable Up and Downconverter for use in broadcast and post. It can process SD (Standard Definition) signals into HD, downconvert HD signals into standard definition, and perform Format and Aspect Ratio Conversion on both SD and HD signals. A special Mirror Output Mode can be enabled, causing the output image to be flipped left to right for use with on-camera talent. The 7900 and one of the optional audio sub modules together only occupy one slot in an Avenue frame – now that’s efficient use of space.

It’s Smart – No Need For Configuration

The 7900 can be configured to continually output your facility’s preferred HD format. Just connect any HD or SD signal to the input and the 7900 will convert it to the appropriate format for output. And, if the 8415 audio option is installed, the audio will have automatic delay compensation.

Upconversion

When con!gured as an upconverter, the 7900 has a standard definition SDI input and four HD SDI outputs. Excellent for on-air use, the 7900 is equally at home in an HD island, in a signal ingest installation, or in a production application.

The 7900 uses sophisticated Edge and Motion Adaptive Noise Reduction, ensuring delivery of a pristine output that is excellent for use in broadcast. All processing is performed on progressive signals at full bandwidth 4:4:4, for optimum signal quality. Signals are interlaced and deinterlaced as required with motion adaption and edge interpolation. Aspect ratio conversion choices include: Letterbox, Anamorphic, Crop and Zoom.

Input standard and frame rate are auto-detected. The 7900 automatically performs 16 bit SD and HD color space conversion. The built-in Proc Amp provides adjustment of signal parameters with controls for Video, Chroma, Setup and Hue. Vertical interval data is faithfully preserved and is passed from SD to HD. The upconverted output is timeable with respect to the reference input.

Downconversion

When used as a downconverter, the 7900 has an HD SDI input and four outputs that can be configured as two SDI and two composite outputs, or four SDI outputs. Whether it’s providing digital feeds to production switchers and routers, or analog monitoring – the 7900 handles it all.

The downconversion process includes Picture Detail Enhancement and Anti-Alias Filtering, which makes for a pristine SD output. The Aspect Ratio Conversion process offers Resizing and Repositioning with choices for: Letterbox, Anamorphic, Crop and Zoom. The 7900 automatically adjusts between HD and SD color space and gamma. Proc amp controls are provided in the form of Video, Chroma, Setup and Hue.

Both the digital and analog outputs are timeable with respect to the reference input. Composite outputs can be timed into house with proper subcarrier and ScH phase.

Cross Conversion

The 7900 provides cross conversion between HD 1.5 Gb/s formats, processing all popular variations of 1080 and 720, making it simple for every facility to ingest any type of HD signal.

All popular variations of 720p, 1080i, 1080sF and 1080p are supported. The 7900 converts between any HD signals within the 59.94/23.98/29.97 family, within the 50/25 fps family, or within the 60/30 fps family. 3:2 pulldown is used when converting between 59.94 and 23.98. Film mode is automatically detected.

Metadata

HD closed captioning is carried in data packets in the vertical interval ancillary data space. The 7900 properly translates between HD caption data and traditional SD captioning (line 21 or 23) so that closed captioning content is converted transparently between video standards and formats.

Automatic Aspect Ratio Conversion

The 7900 supports WSS (Wide Screen Signaling), and AFD (Active Format Description) and other methods used to mark or identify the aspect ratio of the video content. These flags are generated at the output of the module, and they are read at the input. This allows the up and downconversion process to adapt automatically to material that is already in letter or pillarbox form in order to produce the most appropriate conversion.

Audio Options

When an audio sub module is installed, audio is automatically delayed as needed to compensate for the video processing in the 7900. For complete audio processing, choose from three different audio sub modules. Sub modules plug onto the 7900 board and do not take up a slot in the frame.

The 8415 is an eight-channel audio sub module with AES I/O that provides management of embedded audio in the processing path, or supports audio embedding/disembedding alongside the video processing elements. Embedded audio is safely bypassed around the video frame store with the lip sync preserved. Level adjustments and channel shuffling are accessed through the built-in audio mixer. All audio processing is performed at full 24 bit resolution.

The 7610 provides carriage of up to eight channels of embedded audio through the format conversion process. Embedded audio in the input signal is delayed to match the video delay and preserve lip sync. The delayed content is reinserted in the video output. No level adjustment or channel swapping is provided.

In addition, the 7615 provides processing for signals with eight channels of embedded audio. It offers the same processing and AES I/O as the 8415 plus the ability to decode Dolby-E signals.

Complete Control System

The 7900 can be con!gured locally or controlled and con!gured remotely with Avenue Touch Screens, Express Panels, or Avenue PC Software. Alarm generation, configurable user levels, module lock out, and customizable menus are just some of the tools included in the Avenue Control System.

Avenue 7900 Specifications

Serial Digital Input

• Number: One
• Type: HD Serial Digital 1.485 Gb/s SMPTE 274M, 292M or 296M or SD Serial Digital 270 Mb/s SMPTE 259M (Both 525 and 625 SD standards)
• Impedance: 75 Ω
• Return Loss: >15 dB
• Max Cable Length: 270 Mb/s 300 Meters, Belden 1694A / 1.485 Gb/s 100 Meters, Belden 1694A

HD Standards Supported

• 1080i (SMPTE 274M -4,5,6) 50, 59.94 or 60 Hz
• 720p (SMPTE 296M -1,2,3) 50, 59.94 or 60 Hz
• 1080p (SMPTE 274M -9,10,11) 23.98,24, 25 Hz
• 1080sF (RP211 -14,15,16) 23.98, 24, 25Hz

Serial Digital Output

• Number: Two, Three or Four Selectable
• Type: SMPTE 274M, 292M or 296M when HD SMPTE 259M (525 or 625) when SD
• Impedance: 75 Ω
• Return Loss: >15 dB
• Output DC: None (AC coupled)

Reference Input

• Number: One external (modules BNC), One internal (frame master ref-BNC)
• Signal Type: PAL or NTSC composite video or HD Tri-Level Sync
• Return Loss: >40dB (applies to external ref input)

Analog Output (available when output is SD)

• Number: Two Max (BNCs shared with SD-SDI outputs)
• Type: NTSC or PAL Composite, Standard matches SDI output
• Impedance: 75 Ω
• Return Loss: >40 dB
• Output: DC <50 mV
• Bit Resolution: 12 bit output reconstruction, 8x Oversampling
• Signal to Noise: >65 dB
• Frequency Response: ±0.1dB 0 to 5.5 MHz
• K Factor: <1%
• ScH Phase error: <±2 degrees
• Differential Phase <1 degree
• Differential Gain <1%

Conversion Directions

• Up/Down Conversion between:
  • 525 (NTSC) and 1080i/59.94, 720p/59.94, 1080p/23.98, 1080sF/23.98
  • 625 (PAL) and 1080i/50, 720p/50,1080p/25,1080sF/25
• Cross Conversion within frame rate families:
  • 525 Derived Family: 1080i/59.94, 720p/59.94, 1080p/23.98, and 1080sF/23.98
  • 625 Derived Family: 1080i/50, 720p/50, 1080p/25, 1080sF/25

AES/EBU Digital Inputs (with 8415 sub module option)

• Number: Four (total of 8 channels)
• Type: AES3id
• Connectorization: Coaxial, 75 Ω
• Bit Depth: 20 and 24 Bit
• Sample Rate: 30kHz to 100kHz (sample rate converted internally to 48kHz)
• Crosstalk: <144 dB
• Dynamic Range: >144 dB
• Reference Level: -18 or -20 dBFS (selectable)
• AC-3, Dolby-E: Supported when inputs are synchronous

Embedded Inputs

• Number: Four AES Streams (from video input), Eight channels from any two of four groups, Selectable to any of four groups
• Channels: Eight
• Bit Depth: 20 and 24 Bit

AES/EBU Digital Outputs

• Number: Four (total of eight channels)
• Type: AES3id
• Connectorization: Coaxial, 75 Ω
• Bit Depth: 20 and 24 Bit
• Sample Rate: 48kHz, Synchronous to Video output
• Reference Level: -18 or -20 dBFS (selectable)

Embedded Output

• Number: Four or two, depending on configuration
• Group Assign: Cascade, or Replace any two of four groups
• Channels: Eight
• Bit Depth: 24 Bit

General Specifications

• Power Consumption: 10 watts
• Temperature Range: 0 to 40° C ambient (all specs met)
• Relative Humidity: 0 to 95%, non-condensing
• Altitude: 0 to 10,000 ft.